1. To operate a company vehicle in the handling of transportation of scheduled wastes. 2. Transports loads safely and promptly over the required route, obeying all traffic laws and observing all safety regulations. 3. To ensure the company’s vehicle conditions are well maintained and cleaned at all times. 5. To be responsible for updating and maintaining the vehicle maintenance log. 6. To be responsible for updating any documentation related to the company’s vehicle (LPKP, PUSPAKOM, etc.). 7. To be responsible for monitoring the vehicle’s license to be up to date and communicating with a respective person in charge for the arrangement of license renewal. 8. Person in charge of raising PR to the procurement department for any matters related to the company’s vehicle. 9. Facilitates routine inspection of the company’s vehicles, which may include checking oil, water, fuel, and air; and performing minor troubleshooting if necessary. To report maintenance malfunctions to the Supervisor and communicate with a mechanic. 10. To be responsible for keeping commercial driver's license up to date. 11. To adhere to the company’s rules and regulations. Report any HSE issues or incidents to the personnel in charge. 12. To maintain a positive attitude and good communication towards others at all times. 13. To perform general work when there is no driver duty and as required, including assisting other departments including but not limited to Warehouse, WWTP, and OSRP. 14. To understand and maintain QMS ISO 9001:2015 Quality Management System. 15. In addition to the roles and responsibilities, employees always have to take care of the safety and health of themselves and other employees in accordance with Occupational Safety & Health Act (OSHA) 1994 Section 24 PART VI GENERAL DUTIES OF EMPLOYEES. 16. To perform other related duties as assigned.

1) To provide technical knowledge & experience for planned survey operations 2) To monitor and guide survey contractor and rig ROV team operations ensuring: a. Adherence to survey procedures & ITP b. Liaison with Client survey representative & rig management c. Agreement with operational scheduling on site d. On site check of survey results e. Sign off of DPR & ITP 3) Assessment of and planning of any unexpected management of change to operations 4) Co‐ordination of reporting from operations vessel to onshore survey & project management 5) Liaison during mob/demob of survey personnel & equipment

Job Responsibilities and Description:

1.

Manage financial reimbursements and invoice issuance for various company projects. ...

Responsibilities

To assist the Head of Department in the day to day running of the shipping department

Handling local delivery, import and export shipment and preparing of necessary documents ...

Job Responsibilities

Promote and drive sales of new vehicles/car

Participate in road shows, sales activities, and launching events ...

o Menjalankan ujian rintangan penebat pada semua peralatan elektrik o Menyelesaikan masalah kerosakan elektrik utama dan kecil o Membaiki dan menyelenggara peralatan elektrik seperti mesin DH, VHF, GPS dan sebarang peralatan komunikasi yang kritikal o Menjalankan kerja-kerja pendawaian semula untuk peralatan elektrik o Menjalankan pemasangan elektrik untuk di darat & di laut o Membantu pasukan dari semasa ke semasa untuk memastikan operasi harian berjalan dengan lancar o Menjalankan sebarang tugas lain yang sesuai dengan jawatan apabila diperlukan atau seperti yang diminta

Job Description

Job Responsibilities

Manage facility 5S inspection regularly and coordinate repair ensuring it is at satisfactory level. ...

1) To provide technical knowledge & experience for planned survey operations 2) To monitor and guide survey contractor and rig ROV team operations ensuring: a. Adherence to survey procedures & ITP b. Liaison with Client survey representative & rig management c. Agreement with operational scheduling on site d. On site check of survey results e. Sign off of DPR & ITP 3) Assessment of and planning of any unexpected management of change to operations 4) Co‐ordination of reporting from operations vessel to onshore survey & project management 5) Liaison during mob/demob of survey personnel & equipment

 Compliance with client requirements, TechnipFMC standards & recognized industry standards with respect to  design work scopes  Undertake project and tender specific tasks, model reviews on an ad hoc basis as required  Originate design deliverables (including models and all technical documentation) as required by project and  engineering teams in accordance with project, statutory and TechnipFMC Group guidelines to project  schedule  Interface with other engineering / design disciplines during course of project execution  Maintain awareness of and compliance with the Management System procedures which directly affect the  work undertaken.  Administrate project vault folder for drawing documentation and review process.  Guide and mentor draftsman on daily design and drafting activities.  Guide and mentor the team  Actively involve and uphold strong commitment in supporting all APAC engineering initiatives.  Animation production for external / internal illustration purposes.

1. To assist in daily warehouse operations tasks. 2. To perform waste identification, collection, segregation, weighing and waste arrangement in the warehouse. 3. To perform stuffing of waste shipments. 4. To be responsible for updating weekly usage of the receptacle. 5. To be responsible for updating the Job Progress Control Board (JPCB). 6. To ensure the work area is clean and tidy at all times. 7. To understand and maintain QMS ISO 9001:2015 Quality Management System. 8. In addition to the roles and responsibilities, employees always have to take care of the safety and health of themselves and other employees in accordance with Occupational Safety & Health Act (OSHA) 1994 Section 24 PART VI GENERAL DUTIES OF EMPLOYEES. 9. To perform other related duties as assigned.

We are a licenced trust company and company secretary in Labuan. We incorporate Labuan companies, apply financial services licences, and, advising on tax and corporate structures.

We are looking for talents with positive and pleasant personalities to join our

Operation team in the Labuan office ...

EMP TEAM is either a life insurance and family takaful services agency under Prudential Assurance Malaysia Berhad and Prudential BSN Takaful Berhad which is base at Meru Perak(EMP). We serving the savings, protection and investment needs of Malaysians by offering a full range of financial solutions through its branches, agency force and bancassurance distribution partners network nationwide.

Job descriptions:

Assisting with the development and implementation of company policies ...

The Logistics Manager is responsible for definition of the overall logistics strategy for all prospects, tenders and projects in accordance with the contractual and HSE requirements for subsea business unit. They should understand and acquire the operational knowledge of local laws/rules with regard, as a minimum, to the following topics:  Immigration / visas,  Importation/exportation/clearance of vessels,  Importation/exportation of equipment (permanent, installation aids, spreads, etc.),  Regulations regarding work on site for expatriates and local manpower  Prepare, review and approval of Project Logistics & Transportation Plan  Prepare, review and approval Import & Export Procedure  Prepare, review and approval of Material Movement Procedure  Prepare, review and approval Packing/Marking & Shipping Procedures The Logistics Manager is responsible to manage a team of Logistics personnel either assigned to projects or working for the department assigned to multiple projects. Key components of this department function are to:  Maintain and implement a detailed manpower forecast for all logistics requirements of Prospects, Tenders, Projects and department consolidation work  Prepare, update and roll out department standard operating procedures and processes  Prepare, review and approve logistics cost estimates for Tenders and Projects  Prepare, review and approve detailed timelines / planning for mobilisation & demobilisation

 Analysis for the different offshore installation activities (Flexibles flow-line and risers, Umbilicals, HFLs, Rigid pipeline and Rigid Spools…).  Analysis for the different activities of the subsea structure installation (Manifolds, Protection structures, PLETs, ILTs and …).  Interface with project team.  Offshore support for the on-going installation activities.  Write technical project documents (installation engineering memo and installation analysis reports).  Liaise with Project Teams for project data, installation feasibility, reporting to client.  Liaise with Project Team to clarify aspects of the work and complete tasks within the agreed timeframe.  Liaise with Project Team and client to clarify installation analysis concerns.

1. Key in manifest in system preparation for incoming vessel 2. Documentation/filling of all incoming and outgoing correspondence itemize declaration on the system 3. Prepare overtime schedule based on customer application 4. Issue work order haulage export and haulage import

Analysis for the different offshore installation activities (Flexibles flow-line and risers, Umbilicals, HFLs, Rigidpipeline and Rigid Spools…). Analysis for the different activities of the subsea structure installation (Manifolds, Protection structures, PLETs, ILTs and …). Interface with project team. Offshore support for the on-going installation activities. Write technical project documents (installation engineering memo and installation analysis reports). Liaise with Project Teams for project data, installation feasibility, reporting to client. Liaise with Project Team to clarify aspects of the work and complete tasks within the agreed timeframe. Liaise with Project Team and client to clarify installation analysis concerns.

• Shall ensure that he is familiar with the machinery and systems so that, in an emergency situation, essential services can be safely and speedily restored. In addition, must have a full understanding of, and abide by, Company procedures, policies and instructions • Shall assist with survey work as directed by a Senior Officer • Shall ensure that any information he enters in the maintenance records is accurate. His hand-over notes will encompass a comprehensive coverage of his work during his period of engagement on the vessel and he will ensure that all manuals and drawings pertaining to his work are kept up to date • Will notify the Vessel Chief Engineer of spare gear and stores requirements • Shall be fully conversant with the relevant codes of practice • Is to keep the Vessel Second and Chief Engineers fully informed as to the progress of any work which he has undertaken. Shall inform the Vessel Second and Chief Engineers of any defects or problems encountered in his area of responsibility • Shall be conversant with electrical plant on the unit, in particular the SCR system • Shall be trained as a Responsible Person for Permit to Work (PTW) system and isolations

Includes but not limited to: • Shall be responsible for the safe and efficient operation of all machinery and equipment for which the Engineering department has responsibility • Shall be responsible for the supervision of the Engineering department staff and for the allocation of responsibility with regard to maintenance and operating duties • Must be familiar with the machinery and systems, so that, in an emergency situation, essential services can be safely and speedily restored. In addition must have a full understanding of, and abide by, Company procedures, policies and instructions. Shall ensure that the staff under his control are adequately trained • Shall be aware of Class requirements and will be responsible for the preparation of machinery for survey, as directed by the Vessel Chief Engineer • Shall be responsible for ensuring that the information, presented in the Engine Record (ER) log, maintenance records, water condition logs and other information, as required, is accurate and up to date. His hand-over notes will encompass a comprehensive coverage of his work during his period of engagement on the vessel • Responsible for advising the Vessel Chief Engineer of spare gear requirements • Shall ensure that maintenance and repair work, done in the Engineering department is adequately supervised and carried out in a safe manner, without contravention of applicable rules and regulations • Shall assist the Vessel Chief Engineer with the preparation of the running repair list, supervision of major repairs and dockings. Shall meet and discuss daily with the Vessel Chief Engineer and those under his control, planned work schedules, progress and defects/problems encountered • Shall assist the Vessel Chief Engineer with the planned maintenance system • There are normally two Second Engineers onboard the vessel, each working a 12 hour shift, however, during periods of down manning, as in lay-up, when there may be only one Second Engineer onboard then he will assume the undernoted duties in total • Review the Safety Notices, TMOS Circulars files and the TMOS Business Management System (BMS) Amendment file in the current version of the TMOS CD-Rom, upon joining and re-joining the vessel • Shall be appointed Deputy Safety Officer and assist the Safety Officer in the execution of duties including but not restricted to: o Safety related inspections of machinery spaces o Control of Control of Substances Hazardous to Health (COSHH) relating to engineering consumables o Accident/incident investigation o Monitoring processes which have the capability to cause an environmental impact

Includes but not limited to: • Shall be responsible for the safe and efficient operation of all machinery and equipment for which the Engineering department has responsibility • Shall be responsible for the supervision of the Engineering department staff and for the allocation of responsibility with regard to maintenance and operating duties • Must be familiar with the machinery and systems, so that, in an emergency situation, essential services can be safely and speedily restored. In addition must have a full understanding of, and abide by, Company procedures, policies and instructions. Shall ensure that the staff under his control are adequately trained • Shall be aware of Class requirements and will be responsible for the preparation of machinery for survey, as directed by the Vessel Chief Engineer • Shall be responsible for ensuring that the information, presented in the Engine Record (ER) log, maintenance records, water condition logs and other information, as required, is accurate and up to date. His hand-over notes will encompass a comprehensive coverage of his work during his period of engagement on the vessel • Responsible for advising the Vessel Chief Engineer of spare gear requirements • Shall ensure that maintenance and repair work, done in the Engineering department is adequately supervised and carried out in a safe manner, without contravention of applicable rules and regulations • Shall assist the Vessel Chief Engineer with the preparation of the running repair list, supervision of major repairs and dockings. Shall meet and discuss daily with the Vessel Chief Engineer and those under his control, planned work schedules, progress and defects/problems encountered • Shall assist the Vessel Chief Engineer with the planned maintenance system • There are normally two Second Engineers onboard the vessel, each working a 12 hour shift, however, during periods of down manning, as in lay-up, when there may be only one Second Engineer onboard then he will assume the undernoted duties in total • Review the Safety Notices, TMOS Circulars files and the TMOS Business Management System (BMS) Amendment file in the current version of the TMOS CD-Rom, upon joining and re-joining the vessel • Shall be appointed Deputy Safety Officer and assist the Safety Officer in the execution of duties including but not restricted to: o Safety related inspections of machinery spaces o Control of Control of Substances Hazardous to Health (COSHH) relating to engineering consumables o Accident/incident investigation o Monitoring processes which have the capability to cause an environmental impact

Management • Maintaining company quality assurance and control philosophy during all activities • Ensure the Clients requirements are being met in accordance with the relevant standards and procedural documentation • Ensure all operations are carried out in compliance with local legislative requirements • Liaising with the departmental supervisors as to the readiness of equipment • Ensure all discipline and departmental handovers are carried out clearly and concisely, ensuring relevant information is logged within the handover log and the daily logs • Ensure all procedural or system changes are managed in accordance with company MOC process Safety • HSE incidents and non-conformances are logged and recorded appropriately • Fully familiar with processes for reporting unsafe acts, time out for safety and stop the job authority Operations • Coordinate/supervise operations, where applicable, in line with project plans • Fully conversant with project procedures, liaising with Project Engineers and assisting with organising and planning of operational project plans • Ensuring all departmental tool box talks, shift handovers and briefings are carried out in accordance with company guidelines and logged appropriately • Planning, preparation and ongoing management of readiness of project equipment • Ensure all system checks and operations are carried out by competent personnel • Involved in the pre planning and assist with project mobilisations and demobilisations • Ensure regular updating of operational status, equipment losses or failure and project schedules to assist in planning and highlight possible issues within the scope of work Technical/systems • Continued assurance of all documentation in use is relevant and traceable within the BMS or exerts from vendor operational manuals

Management • Maintaining company quality assurance and control philosophy during all activities • Ensure the Clients requirements are being met in accordance with the relevant standards and procedural documentation • Ensure all operations are carried out in compliance with local legislative requirements • Liaising with the departmental supervisors as to the readiness of equipment • Ensure all discipline and departmental handovers are carried out clearly and concisely, ensuring relevant information is logged within the handover log and the daily logs • Ensure all procedural or system changes are managed in accordance with company MOC process Safety • HSE incidents and non-conformances are logged and recorded appropriately • Fully familiar with processes for reporting unsafe acts, time out for safety and stop the job authority Operations • Coordinate/supervise operations, where applicable, in line with project plans • Fully conversant with project procedures, liaising with Project Engineers and assisting with organising and planning of operational project plans • Ensuring all departmental tool box talks, shift handovers and briefings are carried out in accordance with company guidelines and logged appropriately • Planning, preparation and ongoing management of readiness of project equipment • Ensure all system checks and operations are carried out by competent personnel • Involved in the pre planning and assist with project mobilisations and demobilisations • Ensure regular updating of operational status, equipment losses or failure and project schedules to assist in planning and highlight possible issues within the scope of work Technical/systems • Continued assurance of all documentation in use is relevant and traceable within the BMS or exerts from vendor operational manuals

Most of the work will be related to: - Participation in promotional campaigns to spread the brand awareness in the city. - Approaching potential business partners of the company with propose of extensive and fruitful cooperation. - Work with promoters. - Online communication with drivers: registration in mobile application, assisting with work related issues; - Processing requests and feedback from users (live chat, outbound calls, face-to-face); - Tracking the quality of the provided service and handling objections. Requirements: - SPM/Diploma/Bachelor's degree in any field (fresh graduates are welcome to apply); - Strong command of English; - Sales or Customer Service experience will be an advantage; - Positive attitude, friendly and outgoing personality; - Excellent interpersonal and problem-solving skills; - Computer literate (MS Office). Benefits: - Yearly evaluation and increment; - Petrol compensation; - SOCSO and EPF contributions; - Free online training program from the first day of working; - Tech-savvy environment: corporate Customer Relationship Management software, corporate messenger, news blog; - Compact and well equipped office, working schedule: 5 days a week, 9am - 6pm; - Annual leaves & sick leaves; - Overtime claim; - Career growth opportunities.

Management • Maintaining company quality assurance and control philosophy during all activities • Ensure the Clients requirements are being met in accordance with the relevant standards and procedural documentation • Ensure all operations are carried out in compliance with local legislative requirements • Liaising with the departmental supervisors as to the readiness of equipment • Ensure all discipline and departmental handovers are carried out clearly and concisely, ensuring relevant information is logged within the handover log and the daily logs • Ensure all procedural or system changes are managed in accordance with company MOC process Safety • HSE incidents and non-conformances are logged and recorded appropriately • Fully familiar with processes for reporting unsafe acts, time out for safety and stop the job authority Operations • Coordinate/supervise operations, where applicable, in line with project plans • Fully conversant with project procedures, liaising with Project Engineers and assisting with organising and planning of operational project plans • Ensuring all departmental tool box talks, shift handovers and briefings are carried out in accordance with company guidelines and logged appropriately • Planning, preparation and ongoing management of readiness of project equipment • Ensure all system checks and operations are carried out by competent personnel • Involved in the pre planning and assist with project mobilisations and demobilisations • Ensure regular updating of operational status, equipment losses or failure and project schedules to assist in planning and highlight possible issues within the scope of work Technical/systems • Continued assurance of all documentation in use is relevant and traceable within the BMS or exerts from vendor operational manuals

• Originate or check engineering deliverables on standard discipline engineering design to meet project, statutory and Technip Group rules to project schedule • Participate in formal or informal reporting to Engineering Discipline Leader on progress of engineering tasks • Support for the technical authority on project, tender or design study, representing the installation discipline. • Preparation of technically robust, safe, environmentally friendly installation procedures and solutions for Subsea Installation • Adherence to the business management system and provision of quality installation engineering to clients, both external and internal. • Provide feedback into resource management to meet the allocated scope of work schedule requirements. • Active participation in technical, peer, safety and readiness reviews • Consult feedback and distribute within the team, lessons learnt, safety, information for the improvement of the team and individuals technical scope of work. • Perform calculations and analysis as required. • Preparation of the specifications and scope of works for subcontractors, technical bid tabulations and technical support. • Management and follow-up of subcontractors and vendors as well as interface towards other contractors or stakeholders. • Preparation of engineering task descriptions and drawing requisitions to interface with other disciplines and drafting office. • Assist as required by projects on procurement of either permanent or temporary material/ equipment associated with discipline engineering • Supervise other engineers on a standard discipline engineering scope of work • Provide site engineering supervision/ technical assistance for manufacturing, fabrication and/ or installation site

• Originate or check engineering deliverables on standard discipline engineering design to meet project, statutory and Technip Group rules to project schedule • Participate in formal or informal reporting to Engineering Discipline Leader on progress of engineering tasks • Support for the technical authority on project, tender or design study, representing the installation discipline. • Preparation of technically robust, safe, environmentally friendly installation procedures and solutions for Subsea Installation • Adherence to the business management system and provision of quality installation engineering to clients, both external and internal. • Provide feedback into resource management to meet the allocated scope of work schedule requirements. • Active participation in technical, peer, safety and readiness reviews • Consult feedback and distribute within the team, lessons learnt, safety, information for the improvement of the team and individuals technical scope of work. • Perform calculations and analysis as required. • Preparation of the specifications and scope of works for subcontractors, technical bid tabulations and technical support. • Management and follow-up of subcontractors and vendors as well as interface towards other contractors or stakeholders. • Preparation of engineering task descriptions and drawing requisitions to interface with other disciplines and drafting office. • Assist as required by projects on procurement of either permanent or temporary material/ equipment associated with discipline engineering • Supervise other engineers on a standard discipline engineering scope of work • Provide site engineering supervision/ technical assistance for manufacturing, fabrication and/ or installation site

• Shall be familiar with his emergency duties and he must be aware of, and abide by Company procedures, policies and instructions • Shall be responsible for the manning of any crane as required during lifting operations • Shall assist with the maintenance of cranes under direction of the Chief Engineer • Assist the Project crew as required whilst also liaising with Bosun and duty deck officers • Prior to use and at the start of each shift shall perform a visual examination of cranes, complete checklist as prescribed in TMOS Business Management System (BMS) and report to the Bridge/Operations • Control Centre (OCC) that the crane checks have been completed • Shall be responsible for the safe and efficient operation of the equipment in the field of his responsibility and maintain the cleanliness of his work area • Shall assist in carrying out planned maintenance of lifting and associated equipment • Shall assist in lashing and securing cargo and equipment on the weather decks or other cargo spaces and the stores/spares in storerooms in his area of responsibility • Shall assist in washing down / degreasing of the crane and associated lifting equipment externally • Shall assist in preparation and painting of the crane and associated lifting equipment as required • Shall assist the helideck party during helicopter operations and act as a baggage handler as required • Shall be expected to maintain a fire watch as required • Shall assist the mooring party during mooring/unmooring operations, the rigging of gangways and the deployment/recovery of pilot ladders, as required

 Medical coverage (routine and emergency care) on board on 24 hour basis  Identify and report work related illness  Provide skilled treatment under the direction of the registered medical practitioner working with the Occupational Health Provider  Request written confirmation of Prescription Only Medication after consultation with Topside Doctor on call  On Diving Support Vessels (DSV’s): - Provide pre & post saturation medicals. - Check contents of medical bags  Monitors general well-being of personnel and condition of their environment  Be familiar with the Ship, onboard hospital, medical stocks/equipment and emergency procedures  Ensures that the Hospital facilities are maintained in a clean, hygienic and tidy state  Ensures medical scales are maintained in accordance with T-MOS Business Management System (BMS) requirements  Updates Vessel Health Needs Assessments (Health Hazard Identification) on an annual basis or as required  Conducts Health Risk Assessments review on an annual basis or as required  Assesses the need for Health Surveillance in conjunction with the Occupational Health Manager and carries out the Health Surveillance  Control of Substances Hazardous to Health (COSHH) Work with Safety Officer and HSE Coordinator to consider health surveillance as directed by the COSHH assessment  Attend morning meetings and report general status with regards to Health Services, Work Environment, Project Health related activities  Delivers Health Education Packages to the Crew including First Aid Training  During mobilisation give briefing on medical routines on board  Maintenance of First Aid and Eye Wash stations throughout the vessel  Ensures sanitation of the telephone mouthpiece and earpieces by stewards as required  Ensures three monthly inspections following sanitisation of shower heads by engineers  As team leader of the medical party will hold regular training/instruction exercises with members of the team every week in line with drills procedure

Main accountabilities: • The Offshore HSE Advisor shall provide support, advice and guidance to marine and project activities and ensure they are undertaken in accordance with the Company’s standards and procedures. • Interact with both the marine and construction crews directly at the worksite, developing the HSE culture at every opportunity during operations. • Interact and communicate with oncoming BU and TMOS project teams to gain an understanding of their work scopes and risk profile. • Provide support, coaching and HSE guidance to all offshore personnel to ensure that all regulatory and TechnipFMC HSE standards and requirements are clearly understood and complied with. • Remain aware of the relevant HSE legislation and Company procedures relevant to their operations. • Establish a highly visible worksite HSE presence and proactively monitor for substandard conditions and behaviours through worksite visits, audits and inspections. • Coach workforce in high quality risk management such as Toolbox talks, risk assessments, interventions, hazard identification, MOC etc. Facilitate effective two-way communication with the workforce on HSE issues. • Assist the vessel and project offshore management teams in ensuring that all accidents / incidents are correctly identified, reported, investigated and robust root cause analysis is carried out and corrective and preventative controls are identified, implemented and reviewed for effectiveness. • Compile and analyse vessel safety statistics to identify trends and help improve HSE performance and the vessel safety culture, including synergi case entry, HSE Leading indicator spreadsheet, man hour inputs and PowerBi analysis. • Conduct local vessel HSE related training as required under guidance from the TMOS HSE and Training departments. • Provide ongoing Synergi training to all OMT and Supervisors.

Main accountabilities: • The Offshore HSE Advisor shall provide support, advice and guidance to marine and project activities and ensure they are undertaken in accordance with the Company’s standards and procedures. • Interact with both the marine and construction crews directly at the worksite, developing the HSE culture at every opportunity during operations. • Interact and communicate with oncoming BU and TMOS project teams to gain an understanding of their work scopes and risk profile. • Provide support, coaching and HSE guidance to all offshore personnel to ensure that all regulatory and TechnipFMC HSE standards and requirements are clearly understood and complied with. • Remain aware of the relevant HSE legislation and Company procedures relevant to their operations. • Establish a highly visible worksite HSE presence and proactively monitor for substandard conditions and behaviours through worksite visits, audits and inspections. • Coach workforce in high quality risk management such as Toolbox talks, risk assessments, interventions, hazard identification, MOC etc. Facilitate effective two-way communication with the workforce on HSE issues. • Assist the vessel and project offshore management teams in ensuring that all accidents / incidents are correctly identified, reported, investigated and robust root cause analysis is carried out and corrective and preventative controls are identified, implemented and reviewed for effectiveness. • Compile and analyse vessel safety statistics to identify trends and help improve HSE performance and the vessel safety culture, including synergi case entry, HSE Leading indicator spreadsheet, man hour inputs and PowerBi analysis. • Conduct local vessel HSE related training as required under guidance from the TMOS HSE and Training departments. • Provide ongoing Synergi training to all OMT and Supervisors.