About the Job:

Are you passionate about process control systems and looking for an opportunity to work with a dynamic team in the refinery or petrochemical industry? Look no further! Join our team as a Control System Engineer at GMP Technologies (S) Pte Ltd.

Responsibilities: ...

About us

At ExxonMobil, our vision is to lead in energy innovations that advance modern living and a net-zero future. As one of the world’s largest publicly traded energy and chemical companies, we are powered by a unique and diverse workforce fueled by the pride in what we do and what we stand for.

The success of our Upstream, Product Solutions and Low Carbon Solutions businesses is the result of the talent, curiosity and drive of our people. They bring solutions every day to optimize our strategy in energy, chemicals, lubricants and lower-emissions technologies. ...

What a MTO NPDI New Product Introduction Control Systems Engineer does at HP:

Designs engineering solutions for electrical and electronic parts, subsystems, integrated circuitry, and algorithms based on established engineering principles.

Develops and implements parameters and test plans for new and existing designs to debug defective hardware/ electronic units, sub-assemblies, and process steps. ...

About us

At ExxonMobil, our vision is to lead in energy innovations that advance modern living and a net-zero future. As one of the world’s largest publicly traded energy and chemical companies, we are powered by a unique and diverse workforce fueled by the pride in what we do and what we stand for.

The success of our Upstream, Product Solutions and Low Carbon Solutions businesses is the result of the talent, curiosity and drive of our people. They bring solutions every day to optimize our strategy in energy, chemicals, lubricants and lower-emissions technologies. ...

About us

At ExxonMobil, our vision is to lead in energy innovations that advance modern living and a net-zero future. As one of the world’s largest publicly traded energy and chemical companies, we are powered by a unique and diverse workforce fueled by the pride in what we do and what we stand for.

The success of our Upstream, Product Solutions and Low Carbon Solutions businesses is the result of the talent, curiosity and drive of our people. They bring solutions every day to optimize our strategy in energy, chemicals, lubricants and lower-emissions technologies. ...

Roles & Responsibilities

Responsibilities

· Support for the Operational readiness of the new plant (including walkdowns & punch listing, pre-commissioning, and commissioning activities, preparing SOPs & routine schedules etc ...

Responsibilities

Support for the Operational readiness of the new plant (including walkdowns & punch listing, pre-commissioning, and commissioning activities, preparing SOPs & routine schedules etc

Once the plant is in operations, carryout routine maintenance activities. ...

Job Description

Responsible for the maintenance of all control systems under the direction of the I&C Supervisor, acting proactively and maintaining a high standard of preventive, predictive and corrective maintenance, so that they are carried out technically efficiently, in compliance with schedules, MODEC procedures, maintenance philosophy, national and international regulations and standards, ensuring that all control systems are operational and preserved for the assigned unit.

Carry out or supervise 3rd party employees in all maintenance and inspection related to the Control Systems discipline, in order to ensure the safe and efficient functioning of all plant and machinery in the unit, as well as emergency equipment, thus contributing to the production and revenue target achievement. ...

Roles & Responsibilities

Job Description

Responsible for the maintenance of all control systems under the direction of the I&C Supervisor, acting proactively and maintaining a high standard of preventive, predictive and corrective maintenance, so that they are carried out technically efficiently, in compliance with schedules, MODEC procedures, maintenance philosophy, national and international regulations and standards, ensuring that all control systems are operational and preserved for the assigned unit. ...

A Corp Lab in NTU is looking for a motivated Research Scientist to conduct cutting-edge research in the topic of "Green Cloud Computing".

Key Responsibilities

Developing physics-based and data-driven models to characterize dynamics of the interconnected data center systems, including computing, cooling and electric supply; ...

A Corp Lab in NTU is looking for a motivated Research Scientist to conduct cutting-edge research in the topic of “Green Cloud Computing”.

Key Responsibilities:

Developing physics-based and data-driven models to characterize dynamics of the interconnected data center systems, including computing, cooling and electric supply; ...

Roles & Responsibilities

A Corp Lab in NTU is looking for a motivated Research Scientist to conduct cutting-edge research in the topic of “Green Cloud Computing”.

Key Responsibilities: ...

Roles & Responsibilities

Do you want to work at a fast-growing international organization? This is your chance!

At Growy, we develop innovative and disruptive vertical farming technologies that enable us to grow high-quality crops worldwide at a competitive price. With the development of our new fully automated vertical farm, Growy is ready for the future of food supply. From our existing farm in Amsterdam, Growy, through its sub-brand Chef's Farm, delivers leafy greens to many top restaurants in the Netherlands. Our headquarters are in Amsterdam, with branches/farms in Munich, Kuwait, and Singapore. Further expansion is planned in Europe, the Middle East, and Asia. ...

A Corp Lab in NTU is looking for a motivated Senior Research Scientist to conduct cutting-edge research in the topic of "Green Cloud Computing".

Key Responsibilities

Developing physics-based and data-driven models to characterize dynamics of the interconnected data center systems, including computing, cooling and electric supply; ...

Responsibilities

Program functional analysis based on Sequence of Operation (SOO) and develop application interfaces, alarms, and dashboard to monitor and control utility services such as, but not limited to, Chilled water, Air compressors, Glycol, Steam

Perform quality assurance/quality control for the project deliverables. ...

Responsibilities Program functional analysis based on Sequence of Operation (SOO) and develop application interfaces, alarms, and dashboard to monitor and control utility services such as, but not limited to, Chilled water, Air compressors, Glycol, Steam Perform quality assurance/quality control for the project deliverables. Development of control system schematics, panel layout drawings, control diagrams, control functions write up of systems, cable schedule and data point schedule. Conduct and/or supervise site systems testing and commissioning. Coordinate, track, and report documentation changes during project execution Update project progress in a timely manner Perform maintenance and troubleshooting of live applications and associated network.

Requirements Degree/Diploma in Electrical/Mechanical/Automation/Building Technology Engineering or equivalent. 3-5 years' experience in HVAC and Building Management Systems (BMS) industries or relevant fields. Proficiency in Integrated Building Management Solutions such as ICONICS Genesis 64 Proficiency in BACnet protocol including IP, ETH and MS/TP, Modbus protocol including TCP and RTU and Networking Services and Client Workstations Knowledge of HVAC control applications, BMS and electrical power management systems Experience with Direct Digital control (DDC) and Programmable Logic control (PLC) system design, development and management is preferred. Ability to build and install BMS system to monitor and regulate various building services, including chillers, heat exchangers, ACMV, lighting and power metering etc Familiar with BCA/NEA requirements Has a good safety mindset and displays good WSH behaviour. Excellent problem-solving, organizational, analytical, and critical thinking skills

#J-18808-Ljbffr

Roles & Responsibilities

Working Location: Ang Mo Kio

Working Days & Time: Monday to Friday: 9am – 6pm ...

Working Location: Ang Mo Kio

Working Days & Time: Monday to Friday: 9am – 6pm

Salary: Up to $5500 + Bonus ...

A Corp Lab in NTU is looking for a motivated Senior Research Scientist to conduct cutting-edge research in the topic of “Green Cloud Computing”.

Key Responsibilities:

Developing physics-based and data-driven models to characterize dynamics of the interconnected data center systems, including computing, cooling and electric supply; ...

Roles & Responsibilities

A Corp Lab in NTU is looking for a motivated Senior Research Scientist to conduct cutting-edge research in the topic of “Green Cloud Computing”.

Key Responsibilities: ...

Responsibilities

Program functional analysis based on Sequence of Operation (SOO) and develop application interfaces, alarms, and dashboard to monitor and control utility services such as, but not limited to, Chilled water, Air compressors, Glycol, Steam

Perform quality assurance/quality control for the project deliverables. ...

Do you want to work at a fast-growing international organization? This is your chance!

At Growy, we develop innovative and disruptive vertical farming technologies that enable us to grow high-quality crops worldwide at a competitive price. With the development of our new fully automated vertical farm, Growy is ready for the future of food supply. From our existing farm in Amsterdam, Growy, through its sub-brand Chef's Farm, delivers leafy greens to many top restaurants in the Netherlands. Our headquarters are in Amsterdam, with branches/farms in Munich, Kuwait, and Singapore. Further expansion is planned in Europe, the Middle East, and Asia.

Our Growy Tech department is looking for a Control System Engineer with a focus on service tasks, including preventive and corrective maintenance. You will work independently most of the time and collaborate with vendors to set up and automate our vertical farming solutions by building PLC/SCADA-based control systems that interface with equipment from various suppliers. ...

Roles & Responsibilities

Responsible for daily operational requests involving approvals/setups to ensure the performance of Process Control System solutions; Acquire and apply domain knowledge by collaborating with customers for inline variation reduction to improve product quality and yield; Engage in various programs to take care of KPI metrics; Work on automation tasks using R or Python programming and tableau to maintain and develop fundamental reports for the team for sustainability of operation works.

Responsibilities: ...

Responsibilities:

·

Develop systems design, programming and selection of equipment instrumentation and controls. ...

Requirements: At least 3 years of experience in the related field. Diploma/SPVM in civil or equivalent academic experience. Have excellent communication skills. Duties and Responsibilities: ii. Maintenance, troubleshooting, installation, and repairing of all the Heating, Ventilation and Air-Conditioning (HVAC) systems, inclusive of all the mechanical- & electrical-powered machines/equipment iii. Perform preventive maintenance checks iv. Attend to complaints, inspections, setup and reparation as requested by the Management and tenants v. Supervise appointed contractors to carry out maintenance and repair works vi. Report any potential problems/ hazards to the supervisor and take remedial action vii. Carry out repairs and preventive M&E maintenance work in accordance with the schedule.

Description

Requirements:

At least 3 years of experience in the related field. ...

Job Purpose

The jobholder is the Subject Matter Expert on Life Cycle Management and Supply Chain Management for Signalling, Communication and Control (SC&C) Systems. She/he shall be responsible to Manager, System Management (SC&C) on implementing plans and processes for the effective maintenance, operation, and sustainability of SMRT TRAINS' SC&C Systems. The role involves implementing long-term strategies directed by the Manager for SC&C Systems development through relationship management with internal and external stakeholders. Additionally, the jobholder participates in asset management collaboration with the Authority and SMRT stakeholders to meet license requirements.

Responsibilities ...

Roles & Responsibilities

Responsibilities:

Install and configure lighting control systems per specifications and project requirements ...

Roles & Responsibilities

about the company

Our client is a leading industrial and chemicals company. This reputable and expanding industry leader is now looking for a Control System Engineer. ...