Company SSM No 862626-K · 50-200 Employees
4 Job Vacancies
General Care:-
1) For the first 48 hours, avoid winding down the car windows.
2) Allow minimum 7 days after installation before you clean the surface to ensure complete bonding of films to window.
3) You may put up your car decals after the film installation. However, do not paste stickers or other adhesive materials (including suction cups) on the window films within 1st week of installation.
4) Do not peel at the edges of window films.
5) The film may be washed with common washing solutions 30 days after installation.
6) Abrasive type cleaning agents and bristle brushes which will scratch the film must not be used. It is recommended to use synthetic sponges, squeegees, or soft cloth with cleaning solution.
Water Bubbles:-
1) Water bubbles are inevitable in every solar film application and are temporary.
2) Allow up to 2 weeks for the bubble to evaporate where the car is exposed to the sun for at least 1 week.
3) If the bubbles are still visible after 3 weeks, you may approach 3M Certified Applicator for assistance.
Note: For the 1st week after film installation, the windows might appear a bit hazy which will disappear after the water vapours have evaporated
Multi-Glare Rear Glazing
1) Due to the nature of light, when light passes through the glass with the demister area, it will refract and hence causes the “Halo-effect”.
2) The picture on the right shows the glazing effect without any installation of solar film